(with CPR monitor) with 50 Child Face-Shield Lung-Bags, an Instruction Sheet and a nylon carrying case.
Light and dark manikins available upon request.
Prestan Professional Manikins may be equipped with a revolutionary CPR Rate Monitor that allows for instant feedback to both instructor and student regarding the rate of chest compressions. The visual feedback from the CPR Rate Monitor gives students a real life feel of delivering 100 compressions per minute. The CPR Rate Monitor is an optional feature and the Professional Series Manikins are available both with and without it. The CPR Rate Monitor may also be purchased separately and easily installed into your Prestan Professional Manikin.
In addition to the visual rate monitor, students will also hear a clicker sound as the chest is pushed to the appropriate depth allowing them to experience the true force needed to deliver real life chest compressions.
Fast & Simple: Clamshell torso design that accommodates an easy-to-insert face-shield/lung-bag.
|Dimensions||6 x 63.5 x 6 cm|
Replacing a Prestan Infant Manikin Chest Foam – Download PDF
Replacing a Prestan Infant Manikin Rate Monitor – Download PDF
Analyzing the Prestan Professional AED Trainer – Download PDF
Installing Pads on the AED Trainer – Download PDF
Instruction Sheet Prestan Infant Manikin – Download PDF
Instruction Sheet Prestan AED Trainer – Download PDF
Remove the diaper section and tuck in all skin sections. Reattach the diaper section pushing down on the unit as much as possible and continue holding down while screwing in the screws.
The compartment for the batteries is located under the “diaper area” of the manikin. Open the cover to the CPR Rate Monitor by using a small flat-edged screwdriver in the slots on sides and gently lifting. Remove the CPR Rate Monitor unit from the well. Squeeze the tabbed area to open the battery compartment and replace the batteries. Once the batteries are replaced, snap the lid back into place, return the CPR Rate Monitor unit to the well and snap the diaper cover back into place.
We strive to make the Prestan Manikins as similar to real-life as possible. The density of the chest foam used for our Prestan Professional Infant Manikins could be at the higher end of our specifications. Although still true-to-life, a stronger compression force may be required.