(without CPR monitor) with 50 Child Face-Shield Lung-Bags, an Instruction Sheet and a nylon carrying case.
Light and dark manikins available upon request.
Life-like features and weight allows for realistic infant CPR training. Sculpted body contours and realistic skin feel help prepare students for real life rescues. A head that simulates the way an actual infant’s head would move. Face/head tilt enhances the CPR learning experience and teaches students how to open the airway during CPR. Available in single or 4 packs. Available in three skin tones: light (original), medium and dark.
Fast & Simple: Clamshell torso design that accommodates an easy-to-insert face-shield/lung-bag.
|Dimensions||6 x 63.5 x 6 cm|
Replacing a Prestan Infant Manikin Chest Foam – Download PDF
Prestan Professional Infant Manikin Instruction Sheet – Download PDF
Remove the diaper section and tuck in all skin sections. Reattach the diaper section pushing down on the unit as much as possible and continue holding down while screwing in the screws.
The compartment for the batteries is located under the “diaper area” of the manikin. Open the cover to the CPR Rate Monitor by using a small flat-edged screwdriver in the slots on sides and gently lifting. Remove the CPR Rate Monitor unit from the well. Squeeze the tabbed area to open the battery compartment and replace the batteries. Once the batteries are replaced, snap the lid back into place, return the CPR Rate Monitor unit to the well and snap the diaper cover back into place.
We strive to make the Prestan Manikins as similar to real-life as possible. The density of the chest foam used for our Prestan Professional Infant Manikins could be at the higher end of our specifications. Although still true-to-life, a stronger compression force may be required.